--- umc.xml.orig 2014-06-02 14:44:02.386696585 +0200
+++ umc.xml 2014-06-02 14:58:16.542682738 +0200
@@ -5,23 +5,23 @@
Initial setup of a UCC environment
A &ucsUMC; wizard is provided for the initial configuration of a UCC environment. It guides you
- through the basic setting up of a UCC environment with thin clients and/or desktop
+ through the basic setup of a UCC environment with thin clients and/or desktop
clients. Different standard policies are created and configured. The setup wizard is suitable
for small to medium-sized environments. The policies can also be manually configured in the
&ucsUMC; for more complex requirements in which different policies are to be used for
different containers of the LDAP directory or multiple DHCP subnets are to be operated. The
- policies required for each option is listed in the respective chapters.
+ policies required for each option are listed in the respective chapters.
The setup wizard is started via the &ucsUMC; module UCC Setup. In the main
- menu, you can firstly select whether to set up thin clients and/or desktop systems. The UCC
- image(s) is/are then downloaded depending on the selection.
+ menu, you can first select whether to set up thin clients and/or desktop systems. UCC
+ images will be downloaded if required.
UCS offers the possibility of centrally managing the IP addresses and DNS/DHCP settings of
- a network in a network object in the LDAP. This can considerably facilitates the management of
+ a network in a network object in the LDAP. This can considerably facilitate the management of
IP addresses: When creating a UCC client the next free IP address of the network is selected
automatically. Also, DNS and DHCP settings are configured automatically.
@@ -44,7 +44,7 @@
The network configuration of UCC clients is managed through DHCP in nearly all cases (the only
exception are UCC terminal servers). The wizard checks whether a default gateway is assigned
via DHCP. If this is not the case, a dialogue window opens in which the gateway can be
- configured. In the default setting, fixed IP addresses are assigned and only to
+ configured. In the default setting, fixed IP addresses are assigned only to
clients registered in the LDAP.