Univention Bugzilla – Bug 24271
Ändern der Basiseinstellungen
Last modified: 2020-07-02 17:20:31 CEST
Es sollte eine erweiterte Produktdokumentation geben, in der beschrieben ist, wie man Rechnername, DNS-Domäne, LDAP Basis und Windows Domäne auf DCs und Memberservern ändern kann. Mit System Setup in 3.0 können diese Einstellungen nur auf nicht gejointen Systemen durchgeführt werden, siehe auch Bug #24166 und Bug #22904. Die Funktionsweise der aktuellen System Setup Skripte kann als Vorlage verwendet werden.
Das gründsätzliche Vorgehen sollte in der SDB beschrieben werden.
Das ist meines Wissens noch nie im Support angefragt worden - das Modul ist selbsterklärend und intuitiv genug.
(In reply to Tim Petersen from comment #2) > Das ist meines Wissens noch nie im Support angefragt worden - das Modul ist > selbsterklärend und intuitiv genug. Die Funktionalität, auf die sich dieser Bug bezieht ist aber im UMC-Modul überhaupt nicht vorhanden: Es geht um die Funktionen, die unter 2.4 in System Setup vorhanden waren und zu 3.0 entfernt wurden: Ändern der LDAP-Basis, Rechnername, Domänenname eines bereits installierten Systems. WONTFIX ist aber aus meiner Sicht ok, da diese Änderungen sehr fehlerträchtig sind.
Das Thema wurde vor kurzem auch nochmal im Forum angefragt. Ich denke eine kurze exemplarische Anmeldung in welchen Bereichen Werte wie neu gesetzt werden und dass man auf einem Nicht-Master neu joinen muss. Wenn das aus Sicht des Supports nicht notwendig ist, dann sollte das Thema in die erweiterte Doku verschoben werden.
Ist das nicht mehr oder weniger dass hier: http://wiki.univention.de/index.php?title=UCS_Appliance#Automatic_configuration Also: * Zu ändernde Einstellung/UCR in /var/cache/univention-system-setup/profile * /usr/lib/univention-system-setup/scripts/setup-join.sh >>/var/log/univention/setup.log 2>&1
(In reply to Janis Meybohm from comment #5) > Ist das nicht mehr oder weniger dass hier: > http://wiki.univention.de/index. > php?title=UCS_Appliance#Automatic_configuration > > Also: > * Zu ändernde Einstellung/UCR in /var/cache/univention-system-setup/profile > * /usr/lib/univention-system-setup/scripts/setup-join.sh > >>/var/log/univention/setup.log 2>&1 Die alte Doku bezog sich auf die Anpassung eines schon installierten/gejointen Systems, das ist ja mit dem Appliance-Mode nicht vergleichbar.
Again at 2015022821000172: I'll write this today - perhaps its sufficient to explain/use http://docs.univention.de/installation-4.0.html#appliance:use:auto:profile
http://sdb.univention.de/1319
(In reply to Tim Petersen from comment #8) > http://sdb.univention.de/1319 Did you test it? Will it erase you complete domain? For example in a S4 setup? If it still work in this way, it is a side effect that we didn't remove the system setup legacy code from UCS 2. I think we should rather describe the manual procedure.
(In reply to Stefan Gohmann from comment #9) > (In reply to Tim Petersen from comment #8) > > http://sdb.univention.de/1319 > > Did you test it? Will it erase you complete domain? For example in a S4 > setup? Yes, I tested it for changing the hostname and had no sight of users and/or groups. In fact it seems like the ldap gets erased. I placed a bold header in the sdb article > I think we should rather describe the manual procedure. For each attribute? I have no idea how to collect each procedure in one article.
(In reply to Tim Petersen from comment #10) > (In reply to Stefan Gohmann from comment #9) > > (In reply to Tim Petersen from comment #8) > > > http://sdb.univention.de/1319 > > > > Did you test it? Will it erase you complete domain? For example in a S4 > > setup? > > Yes, I tested it for changing the hostname and had no sight of users and/or > groups. In fact it seems like the ldap gets erased. > > I placed a bold header in the sdb article But in this case it is like a re-installation. I would remove the content from the article. > > > > I think we should rather describe the manual procedure. > > For each attribute? I have no idea how to collect each procedure in one > article. No, I think the generic procedure should be described.
I've split the hostname change to: Bug #38366.
Changes and improvements for SDB entries aren't tracked in Bugzilla anymore, so I close these entries. Please comment on help.univention.com or get in touch with the Univention Support team in case you have any suggestions for the SDB.