Univention Bugzilla – Bug 30883
UMC Basic settings does not load if vlan is configured
Last modified: 2013-11-19 06:44:14 CET
UCS 3.1-1 with eth0 static ip and eth1 (unconfigured) and the following vlan configuration (i am not sure if this is a valid configuration) ucr set \ interfaces/eth1/type=manual \ interfaces/eth1/start=false \ interfaces/eth1.2/address=10.200.7.136 \ interfaces/eth1.2/broadcast=10.200.7.255 \ interfaces/eth1.2/netmask=255.255.255.0 \ interfaces/eth1.2/network=10.200.7.0 \ interfaces/eth1.2/start=true \ interfaces/eth1.3/address=10.200.7.137 \ interfaces/eth1.3/broadcast=10.200.7.255 \ interfaces/eth1.3/netmask=255.255.255.0 \ interfaces/eth1.3/network=10.200.7.0 \ interfaces/eth1.3/start=true \ UMC basic settings loads infinite with these settings
This should be fixed via Bug 30816. *** This bug has been marked as a duplicate of bug 30816 ***
UCS 3.2 has been released: http://docs.univention.de/release-notes-3.2-en.html http://docs.univention.de/release-notes-3.2-de.html If this error occurs again, please use "Clone This Bug".