# virsh dumpxml test_ucs_vv_disk0_eth0
test_ucs_vv_disk0_eth0
9aa1b2af-b9c1-527c-f5ca-0148f9d4352a
524288
524288
1
hvm
/usr/lib/xen/boot/hvmloader
destroy
destroy
destroy
/usr/lib64/xen/bin/qemu-dm
>
# virsh start --console test_ucs_vv_disk0_eth0
(grub) ... verbose console=ttyS0 sysrq_always_enabled
Domain test_ucs_vv_disk0_eth0 started
Connected to domain test_ucs_vv_disk0_eth0
Escape character is ^]
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-ucs35-686-bigmem (Debian 2.6.32-30.35.201102011556) (buildd@univention.de) (gcc version 4.3.2 (Debian 4.3.2-1.1.13.200909082302) ) #1 SMP Tue Feb 1 19:59:54 UTC 2011
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 00000000fc000000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x20000 max_arch_pfn = 0x1000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] init_memory_mapping: 0000000000000000-0000000020000000
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] RAMDISK: 1de13000 - 1ffef642
[ 0.000000] ACPI: RSDP 000ea020 00024 (v02 Xen)
[ 0.000000] ACPI: XSDT fc006050 00034 (v01 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: FACP fc005ee0 000F4 (v04 Xen HVM 00000000 HVML 00000000)
[ 0.000000] ACPI: DSDT fc002c40 0321F (v02 Xen HVM 00000000 INTL 20090220)
[ 0.000000] ACPI: FACS fc002c00 00040
[ 0.000000] ACPI: APIC fc005fe0 00068 (v02 Xen HVM 00000000 HVML 00000000)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 512MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 20000000
[ 0.000000] low ram: 0 - 20000000
[ 0.000000] node 0 low ram: 00000000 - 20000000
[ 0.000000] node 0 bootmap 00002000 - 00006000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0020000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0001000000 - 0001525634] TEXT DATA BSS ==> [0001000000 - 0001525634]
[ 0.000000] #4 [001de13000 - 001ffef642] RAMDISK ==> [001de13000 - 001ffef642]
[ 0.000000] #5 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
[ 0.000000] #6 [0001526000 - 0001533091] BRK ==> [0001526000 - 0001533091]
[ 0.000000] #7 [0000007000 - 000000a000] PGTABLE ==> [0000007000 - 000000a000]
[ 0.000000] #8 [0000002000 - 0000006000] BOOTMAP ==> [0000002000 - 0000006000]
[ 0.000000] found SMP MP-table at [c00fccd0] fccd0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00020000
[ 0.000000] HighMem 0x00020000 -> 0x00020000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1f48
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] Xen version 3.4.
> [ 0.000000] Netfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated NICs.
> [ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for this kernel: unplug emulated disks.
[ 0.000000] You might have to change the root device
[ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[ 0.000000] in your root= kernel command line option
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dc000000)
[ 0.000000] Booting paravirtualized kernel on Xen
[ 0.000000] NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c1a00000 s37656 r0 d23784 u2097152
[ 0.000000] pcpu-alloc: s37656 r0 d23784 u2097152 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129951
[ 0.000000] Kernel command line: root=/dev/ram ro vt.default_utf8=0 vga=785 ramdisk_size=133120 flavor=linux nomodeset text console=ttyS0 verbose
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 479060k/524288k available (2652k kernel code, 44620k reserved, 1445k data, 400k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xffd56000 - 0xfffff000 (2724 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffa00000 (2048 kB)
[ 0.000000] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
[ 0.000000] .init : 0xc1401000 - 0xc1465000 ( 400 kB)
[ 0.000000] .data : 0xc12970b9 - 0xc1400570 (1445 kB)
[ 0.000000] .text : 0xc1000000 - 0xc12970b9 (2652 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:1280
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 2799.562 MHz processor.
[ 0.016008] Calibrating delay loop (skipped), value calculated using timer frequency.. 5599.12 BogoMIPS (lpj=11198248)
[ 0.028010] Security Framework initialized
[ 0.031043] SELinux: Disabled at boot.
[ 0.032006] Mount-cache hash table entries: 512
[ 0.036078] Initializing cgroup subsys ns
[ 0.040005] Initializing cgroup subsys cpuacct
[ 0.044004] Initializing cgroup subsys devices
[ 0.048003] Initializing cgroup subsys freezer
[ 0.056008] Initializing cgroup subsys net_cls
[ 0.059587] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.065379] CPU: L2 cache: 256K
[ 0.068003] CPU: L3 cache: 8192K
[ 0.070509] CPU: Unsupported number of siblings 32
[ 0.076005] mce: CPU supports 0 MCE banks
[ 0.080020] Performance Events: unsupported p6 CPU model 30 no PMU driver, software events only.
[ 0.087519] SMP alternatives: switching to UP code
[ 0.131708] Freeing SMP alternatives: 14k freed
[ 0.132007] ACPI: Core revision 20090903
[ 0.140659] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.144948] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.192554] CPU0: Intel(R) Core(TM) i7 CPU 860 @ 2.80GHz stepping 05
[ 0.200001] Brought up 1 CPUs
[ 0.200001] Total of 1 processors activated (5599.12 BogoMIPS).
[ 0.200176] devtmpfs: initialized
[ 0.204227] regulator: core version 0.5
[ 0.208035] NET: Registered protocol family 16
[ 0.212093] ACPI: bus type pci registered
[ 0.216250] PCI: PCI BIOS revision 2.10 entry at 0xfb5d0, last bus=0
[ 0.220003] PCI: Using configuration type 1 for base access
[ 0.224214] bio: create slab at 0
[ 0.233364] ACPI: Interpreter enabled
[ 0.236003] ACPI: (supports S0 S3 S4 S5)
[ 0.239503] ACPI: Using IOAPIC for interrupt routing
[ 0.261167] ACPI: No dock devices found.
[ 0.264046] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.273209] * Found PM-Timer Bug on the chipset. Due to workarounds for a bug,
[ 0.273210] * this clock source is slow. Consider trying other clock sources
[ 0.284670] pci 0000:00:01.3: quirk: region 1f40-1f7f claimed by PIIX4 ACPI
[ 0.311898] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 0.316514] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 0.321473] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 0.325458] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 0.332149] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.336003] vgaarb: loaded
[ 0.340051] SCSI subsystem initialized
[ 0.344038] PCI: Using ACPI for IRQ routing
[ 0.348008] Switching to clocksource tsc
[ 0.351789] pnp: PnP ACPI init
[ 0.356827] ACPI: bus type pnp registered
[ 0.362384] pnp: PnP ACPI: found 12 devices
[ 0.368621] ACPI: ACPI bus type pnp unregistered
[ 0.373255] PnPBIOS: Disabled
[ 0.375719] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 0.381004] system 00:02: ioport range 0x10c0-0x10e1 has been reserved
[ 0.385886] system 00:02: ioport range 0xb044-0xb047 has been reserved
[ 0.391018] system 00:03: ioport range 0x8a0-0x8a3 has been reserved
[ 0.395837] system 00:03: ioport range 0xcc0-0xccf has been reserved
[ 0.401090] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 0.440396] NET: Registered protocol family 2
[ 0.443440] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.447950] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.459259] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.463830] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.467954] TCP reno registered
[ 0.470182] NET: Registered protocol family 1
[ 0.472842] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.476690] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 0.480486] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.484739] Trying to unpack rootfs image as initramfs...
[ 0.488386] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 0.507449] Freeing initrd memory: 34673k freed
[ 0.517028] audit: initializing netlink socket (disabled)
[ 0.521220] type=2000 audit(1300980807.521:1): initialized
[ 0.527661] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.533163] VFS: Disk quotas dquot_6.5.2
[ 0.536077] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.540974] msgmni has been set to 1003
[ 0.544034] alg: No test for stdrng (krng)
[ 0.546945] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.551686] io scheduler noop registered
[ 0.554571] io scheduler anticipatory registered
[ 0.557954] io scheduler deadline registered
[ 0.560906] io scheduler cfq registered (default)
[ 0.564636] vesafb: framebuffer at 0xf0000000, mapped to 0xe0880000, using 1200k, total 4096k
[ 0.570378] vesafb: mode is 640x480x16, linelength=1280, pages=5
[ 0.574246] vesafb: scrolling: redraw
[ 0.576800] vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
[ 0.581739] Console: switching to colour frame buffer device 80x30
[ 0.587067] fb0: VESA VGA frame buffer device
[ 0.590449] isapnp: Scanning for PnP cards...
[ 0.927947] isapnp: No Plug & Play device found
[ 0.931296] xen-platform-pci 0000:00:03.0: PCI INT A -> GSI 28 (level, low) -> IRQ 28
[ 0.937580] Grant table initialized
[ 0.952337] Linux agpgart interface v0.103
[ 0.955491] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.961094] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.966463] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.971029] brd: module loaded
[ 0.973324] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.980828] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.984356] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.988058] mice: PS/2 mouse device common for all mice
[ 0.992865] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.999021] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.003515] rtc0: alarms up to one day, 114 bytes nvram
[ 1.007671] cpuidle: using governor ladder
[ 1.010520] cpuidle: using governor menu
[ 1.013359] No iBFT detected.
[ 1.015738] TCP cubic registered
[ 1.018129] NET: Registered protocol family 10
[ 1.021549] lo: Disabled Privacy Extensions
[ 1.024755] Mobile IPv6
[ 1.026536] NET: Registered protocol family 17
[ 1.029731] Using IPI No-Shortcut mode
[ 1.032553] registered taskstats version 1
[ 1.035842] XENBUS: Device with no driver: device/vkbd/0
[ 1.039593] XENBUS: Device with no driver: device/vfb/0
> [ 1.043344] XENBUS: Device with no driver: device/vbd/768
> [ 1.047116] XENBUS: Device with no driver: device/vbd/832
[ 1.051054] XENBUS: Device with no driver: device/vif/0
[ 1.054760] XENBUS: Device with no driver: device/console/0
[ 1.058762] rtc_cmos 00:05: setting system clock to 2011-03-24 15:33:28 UTC (1300980808)
[ 1.064492] Initalizing network drop monitor service
[ 1.067960] RAMDISK: gzip image found at block 0
[ 2.046322] VFS: Mounted root (ext2 filesystem) readonly on device 1:0.
[ 2.050890] Freeing unused kernel memory: 400k freed
[ 2.056876] Write protecting the kernel text: 2656k
[ 2.060156] Write protecting the kernel read-only data: 988k
init started: BusyBox v1.10.2 (Univention 1:1.10.2-2.16.200909091218)
starting pid 34, tty '': '/sbin/univention-installer-startup'
[ 3.908939] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 3.948043] usbcore: registered new interface driver usbfs
[ 3.951824] usbcore: registered new interface driver hub
[ 4.060470] piix4_smbus 0000:00:01.3: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 4.108570] usbcore: registered new device driver usb
[ 4.170016] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.316198] uhci_hcd 0000:00:01.2: PCI INT D -> GSI 23 (level, low) -> IRQ 23
[ 4.400158] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 4.403842] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
[ 4.568263] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
[ 4.643956] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.648563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.654123] usb usb1: Product: UHCI Host Controller
[ 4.657514] usb usb1: Manufacturer: Linux 2.6.32-ucs35-686-bigmem uhci_hcd
[ 4.662456] usb usb1: SerialNumber: 0000:00:01.2
[ 4.717343] processor LNXCPU:00: registered as cooling_device0
[ 4.765732] FDC 0 is a S82078B
[ 4.968117] usb usb1: configuration #1 chosen from 1 choice
[ 4.971853] hub 1-0:1.0: USB hub found
[ 5.059374] hub 1-0:1.0: 2 ports detected
[ 5.120060] scsi0 : ata_piix
[ 5.128091] scsi1 : ata_piix
[ 5.130235] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
[ 5.135645] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
[ 5.148507] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input2
> [ 5.321877] ata1.01: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
[ 5.412084] usb 1-2: new full speed USB device using uhci_hcd and address 2
[ 5.536858] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
> [ 5.569821] ata1.01: configured for MWDMA2
[ 5.616089] ACPI: Power Button [PWRF]
> [ 5.630253] scsi 0:0:1:0: CD-ROM QEMU QEMU DVD-ROM 0.10 PQ: 0 ANSI: 5
> [ 5.863100] vbd vbd-832: 19 xenbus_dev_probe on device/vbd/832
[ 5.909739] parport_pc 00:0b: reported by Plug and Play ACPI
> [ 5.915500] blkfront: xvda: barriers enabled
[ 5.943220] Initialising Xen virtual ethernet driver.
> [ 5.948511] xvda:
[ 5.951780] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
> [ 6.000025] unknown partition table
[ 6.103803] usb 1-2: New USB device found, idVendor=0627, idProduct=0001
[ 6.111146] usb 1-2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 6.121973] usb 1-2: Product: QEMU USB Tablet
[ 6.125181] usb 1-2: Manufacturer: QEMU 0.10.2
[ 6.128392] usb 1-2: SerialNumber: 1
[ 6.205078] usb 1-2: configuration #1 chosen from 1 choice
> [ 13.367492] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 13.370766] Uniform CD-ROM driver Revision: 3.20
> [ 13.505766] sr 0:0:1:0: Attached scsi generic sg0 type 5
[ 18.130484] usbcore: registered new interface driver hiddev
[ 18.508982] input: QEMU 0.10.2 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-2/1-2:1.0/input/input4
[ 18.521718] generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 0.10.2 QEMU USB Tablet] on usb-0000:00:01.2-2/input0
[ 18.534966] usbcore: registered new interface driver usbhid
[ 18.550438] usbhid: v2.6:USB HID core driver
Starting syslog daemon: syslogd, klogd
Loading USB HID module
Loading